TIPS ABOUT HOW TO Extend Smok Pen Recharge Time
TIPS ABOUT HOW TO Extend Smok Pen Recharge Time
The Smok Pen is really a new pen that was developed by two guys in California. They wished to create a cool writing instrument that appeared as if a genuine pen but had the ability to smoke a hookah. They named their product the Smok Valve and the Smok Pen. The Smok Valve has taken the marketplace by storm.
The Smok Pen includes a built quality that is just great. I came across that even though it is an electronic pen the build quality is just as good as any of the pens that I have reviewed. The reason being of how they made the very best cap. You don’t need to worry about the cap cracking or breaking on you Smok Valve Pen.
The two biggest differences that separate the Smok Valve from other pens may be the shape of the coils and the way that they are built. In general the coil on a Smok Pen is larger than on other pens. I think that they did this deliberately, to help make the pen feel more substantial.
Invest the a glance at a Smok Pen, you will observe that the body of the pen is round and not smooth like other pens. On the trunk of the pen there is a little tab that houses the coil. When you press on the tab you can actually turn the heating element on and off. I really liked this feature since it allows me to use the Smok Pen 22 whenever Personally i think like smoking.
To use the Smok Pen you need to keep carefully the heat button pressed. After the button is pressed, the heating element will begin to warm up. Once it gets to the appropriate temperature it is possible to switch off the heating element. Smok recommends utilizing a 22mm tank. I prefer a larger tank, but that’s just me.
Once you put your Smok Pen in to the tank you will see a indicator light come on. The indicator light will remain green unless you put your Smok Pen into the Smok Pen charger. Once your Smok Pen has entered the charger the indicator light will turn red. It is important to always put your pen into the charger before you apply the e-liquids to the coil heads. Additionally it is important to do this before putting your e-liquids into the coil heads.
After you have completed this step, it is best to check to see for anyone who is at the proper temperature for the coils to fire. If not then you should turn the power off and try again. When you are still not satisfied with your Smok Pen then I suggest you take it set for some troubleshooting. This is exactly what I’d call the “troubleshooting process” because sometimes things just do not work as they should. I would recommend that you perform the following two steps, then go ahead and check the Smok Pen to see if it still gets the electronic charging port.
Before you go any further you should take away the battery from your pen and unscrew the magnetic cap. You should then remove the plastic sleeve that holds the sub-ohm. You will find a wire that runs through the Smok’s body that is green in color. You should loosen this wire using pliers. After you have loosened this wire after that you can access Smok Novo the sub-ohm. You need to then take away the wire from the Smok’s body and carefully insert it into the Smok pen’s electrical port, being careful never to touch the coils.
After you have placed the sub-ohm tank into the pen you need to then place the rest of the components including the wattage, the batteries and the heating element in to the included microwaveable microwave oven. Start the power and follow the on screen instructions. You need to place the pen’s battery into the microwave and activate the setting. You should then wait approximately 30 seconds before turning it back off. When you initially put the pen in to the microwave the electronic reading will show a minimal voltage protection setting. If this setting will not automatically get set you then should follow the on screen instructions.
After the Smok Pen has already reached the temperature that it needs to reach you should then connect the two wires to the positive and negative on the positive post on the Smok unit. You need to then connect the other end of the battery to the negative post on the negative side of the Smok unit. The final step is to connect the positive cable to underneath of the Smok’s on / off switch.
After all the components have been placed in to the pen, you should turn the power on. After the first test run, you have to be able to start to see the battery life indicator light come on. If you don’t see any sign of life from the Smok Pen, you should take away the battery from the pen and then replace it with a brand new one. For your convenience gleam green light which can be pressed in order to confirm the battery charging status. When you have done these things and you do not start to see the green light indicating charging, you should replace the battery.